Safety I.V. Cannulae
I.V. Cannulae
Three Way Stop Cock
Three Way Stop Cock-Lipid Resistant
Stop Cock with Extension Tube
I.V. Infusion Sets
I.V. Infusion Sets with Filter
CVP Manometer
Obturator
Flow Regulators
Extnesion Lines
Burette Set
 
 
 
 
PolySafety IV Cannulae

Safety I.V. Cannulae for continuous peripheral intravenous infusion
 
1101
Polysafety - "flex" type
Safety IV Cannula with snap fit cap and suturable wings
Sizes : 14G to 24G
1102
Polysafety - pen type
Safety IV Cannula without port, without wings
Sizes : 14G to 24G
1103
Polysafety-win type
Safety I.V. Cannula without port, without wings
Sizes : 14G to 24G
1104
Polypen
Polysafety-can type
Safety I.V. Cannula with wings, without port
Sizes : 14G to 24G
Common Features
 
• Self-activating safety mechanism
  Safety needle guard automatically covers the
• needle's sharp bevel after withdrawl of needle from the hub, minimizing the risk of needle stick injuries.
• Cannulation technique similar to conventional I.V. Cannulation.
• Special tapered & kink resistant catheter for easy insertion with optimal flow rates
• Manufactured from tested bio-compatible materials
  offering longer indwelling time
• Injection port with snap fit cap for easy opening and closing
(For code : 1101)
• With hydrophobic bacteria retention filter.
• Options available :
                          » Ported and non ported design
                          » FEP/PUR catheter
   
• Sizes:     14G to 24G
Size  
Catheter
I.D. mm/O.D. mm
Catheter
Length mm
Water
Flow Rate (ml/min)
Orange
1.7
2.1
45
270
Grey
1.3
 1.7 45 180
White
1.1
 1.5 45 125
Green
0.9
 1.3 45/32 80
Pink
0.8
 1.1 32 54
Blue
0.6
 0.9 25 33
Yellow
0.5
 0.7 19 20
 
Instructions for use
 
I.V. Cannula with port & wings
 
1.
  Remove the needle cover
2.
  Grip the Cannula from the inj. Port & needle hub projection
3.
  Insert cannula into vein at a low angle
4.
  Withdraw tje needle gently
5.
  Safety tip clip covered needle tip
6
  Dispose of the needle in sharps container
 
I.V. Cannula without port & wings
 
1.
  Remove the cannula cap
2.
  Hold the bevel phase of the cannuala upwords
3.
  Withdraw the needle gently
4.
5.
  Safety tip clip covered needle tip
6.
  Dispose of the needle in sharp container
 
 
Home | Company | Products | Quality System | Inquiry | Contact Us

Copyright © 2008 Poly Medicure Limited.